kroyale's Photobucket Project61 album media

1/18/07 Set up day at the Daryl Starbird show in Wichita, KS. I drove the truck from Little Rock to Wichita with no problems. Hopefully Mike (the owner) will enjoy many miles of trouble free cruisin\'. Look for this thing on the road.

kroyale — Sun, 28 Jan 2007 12:18:40 MST

kroyale posted a photo

1/18/07 Set up day at the Daryl Starbird show in Wichita, KS. I drove the truck from Little Rock to Wichita with no problems. Hopefully Mike (the owner) will enjoy many miles of trouble free cruisin\'. Look for this thing on the road. - 012207030.jpg

Sits right, drives right. At this stage it still needs a front end alignment, but I\'ve been driving it around close to the shop to check for bugs.

kroyale — Sat, 30 Dec 2006 14:59:29 MST

kroyale posted a photo

Sits right, drives right. At this stage it still needs a front end alignment, but I\'ve been driving it around close to the shop to check for bugs. - 122906017.jpg

Almost looks finished.

kroyale — Sat, 30 Dec 2006 14:59:28 MST

kroyale posted a photo

Almost looks finished. - 122906029.jpg

Grille, bumper, and parking lights are in. You can really get a feel for look of the truck now.

kroyale — Sat, 30 Dec 2006 14:59:27 MST

kroyale posted a photo

Grille, bumper, and parking lights are in. You can really get a feel for look of the truck now. - 122906030.jpg

Got the clutch job done. Also got all the door glass and door mechanisms in.

kroyale — Sat, 30 Dec 2006 14:59:26 MST

kroyale posted a photo

Got the clutch job done. Also got all the door glass and door mechanisms in. - 122906009.jpg

12/05/06 Pulled the transmission and bell housing to put in a new clutch.

kroyale — Sat, 30 Dec 2006 14:59:25 MST

kroyale posted a photo

12/05/06 Pulled the transmission and bell housing to put in a new clutch. - 120506001.jpg

I made a simple seat cover with some vintage bark cloth.

kroyale — Fri, 1 Dec 2006 16:34:57 MST

kroyale posted a photo

I made a simple seat cover with some vintage bark cloth. - 120106007.jpg

Interior slowly coming together.

kroyale — Fri, 1 Dec 2006 16:34:56 MST

kroyale posted a photo

Interior slowly coming together. - 120106004.jpg

12/1/06 Drove it for the first time today, only to determine that it needs a clutch. One step forward, two steps back. I guess that\'s the downside to used engine\'s and tranny\'s. You just don\'t know what you got till you run it.

kroyale — Fri, 1 Dec 2006 16:34:55 MST

kroyale posted a photo

12/1/06 Drove it for the first time today, only to determine that it needs a clutch. One step forward, two steps back. I guess that\'s the downside to used engine\'s and tranny\'s. You just don\'t know what you got till you run it. - 120106003.jpg

11/27/06 Installing the carpet. Combination of a stock molded carpet kit and custom.

kroyale — Tue, 28 Nov 2006 21:19:27 MST

kroyale posted a photo

11/27/06 Installing the carpet. Combination of a stock molded carpet kit and custom. - 112806015.jpg

Dash and steering wheel are coming together. Modified stock instument panel. Clean and simple.

kroyale — Tue, 28 Nov 2006 21:19:26 MST

kroyale posted a photo

Dash and steering wheel are coming together. Modified stock instument panel. Clean and simple. - 112806012.jpg

Mostly complete under the hood. Just a few odds and end to button up.

kroyale — Tue, 28 Nov 2006 21:19:25 MST

kroyale posted a photo

Mostly complete under the hood. Just a few odds and end to button up. - 112806011.jpg

11/24/06

kroyale — Tue, 28 Nov 2006 21:19:24 MST

kroyale posted a photo

11/24/06 - 112806010.jpg

11/17/06 Doors and fenders are bolted on, door latches and strikers are in. Almost ready to go on its first shakedown cruise.

kroyale — Sat, 18 Nov 2006 08:43:13 MST

kroyale posted a photo

11/17/06 Doors and fenders are bolted on, door latches and strikers are in. Almost ready to go on its first shakedown cruise. - 111806015.jpg

This shot shows the lower shock mounts that I made last week, and another angle of exhaust system.

kroyale — Sat, 18 Nov 2006 08:43:12 MST

kroyale posted a photo

This shot shows the lower shock mounts that I made last week, and another angle of exhaust system. - 111806013.jpg

Bed braces and the exhaust are all in place. Both are custom built by KR.

kroyale — Sat, 18 Nov 2006 08:43:11 MST

kroyale posted a photo

Bed braces and the exhaust are all in place. Both are custom built by KR. - 111806010.jpg

In the process of mounting the doors and the rest of the sheet metal. Windshield is in with new weather strip.

kroyale — Sat, 18 Nov 2006 08:43:10 MST

kroyale posted a photo

In the process of mounting the doors and the rest of the sheet metal. Windshield is in with new weather strip. - 111806009.jpg

11/13/06 the engine is running and all mechanical systems are working. Here you can see the freshly mounted door.

kroyale — Sat, 18 Nov 2006 08:43:09 MST

kroyale posted a photo

11/13/06 the engine is running and all mechanical systems are working. Here you can see the freshly mounted door. - 111806008.jpg

11/03/06 The cab and bed are now bolted down permanently. Wiring and the cooling system are all that it needs to run.

kroyale — Sun, 5 Nov 2006 15:52:17 MST

kroyale posted a photo

11/03/06 The cab and bed are now bolted down permanently. Wiring and the cooling system are all that it needs to run. - 110306043.jpg

Beginning the wiring harness installation. It will be a combination of original and custom made.

kroyale — Sun, 5 Nov 2006 15:52:16 MST

kroyale posted a photo

Beginning the wiring harness installation. It will be a combination of original and custom made. - 110306041.jpg

10/20/06 Getting closer. Next big phase is wiring.

kroyale — Fri, 20 Oct 2006 13:34:22 MDT

kroyale posted a photo

10/20/06 Getting closer. Next big phase is wiring. - 102006005.jpg

102006004.jpg

kroyale — Fri, 20 Oct 2006 13:34:21 MDT

kroyale posted a photo

102006004.jpg

Rear susspension is all in except for the shock. Also, notice the gloss black painted wheels.

kroyale — Fri, 20 Oct 2006 13:30:14 MDT

kroyale posted a photo

Rear susspension is all in except for the shock. Also, notice the gloss black painted wheels. - 102006003.jpg

Brakes, clutch and shifter are all done.

kroyale — Fri, 20 Oct 2006 13:30:13 MDT

kroyale posted a photo

Brakes, clutch and shifter are all done. - 102006002.jpg

10/16/06 Starting to get everything put back on the engine.

kroyale — Fri, 20 Oct 2006 13:30:12 MDT

kroyale posted a photo

10/16/06 Starting to get everything put back on the engine. - 102006001.jpg

Brakes are functional.

kroyale — Fri, 20 Oct 2006 13:30:11 MDT

kroyale posted a photo

Brakes are functional. - 101906012.jpg

Bench bleeding the master cylinder. Do you think the master cylinder knows that it\'s not clamped in a vise?

kroyale — Fri, 20 Oct 2006 13:30:10 MDT

kroyale posted a photo

Bench bleeding the master cylinder. Do you think the master cylinder knows that it\'s not clamped in a vise? - 101906010.jpg

Brake lines are all done and I also replaced the rear wheel cylinders. The shoes and hardware are in good shape.

kroyale — Fri, 20 Oct 2006 13:30:09 MDT

kroyale posted a photo

Brake lines are all done and I also replaced the rear wheel cylinders. The shoes and hardware are in good shape. - 101906007.jpg

10/13/06 I put the left inner fender on tempararily to plumb the brake lines.

kroyale — Fri, 20 Oct 2006 13:30:08 MDT

kroyale posted a photo

10/13/06 I put the left inner fender on tempararily to plumb the brake lines. - 101906005.jpg

These are some steering column parts and misc items after being prepped and painted white.

kroyale — Fri, 20 Oct 2006 13:30:07 MDT

kroyale posted a photo

These are some steering column parts and misc items after being prepped and painted white. - 101906003.jpg

I just think this is a cool shot.

kroyale — Tue, 10 Oct 2006 23:01:51 MDT

kroyale posted a photo

I just think this is a cool shot. - 100906007-1.jpg

First time on the floor since it got tore down for body and paint work.

kroyale — Tue, 10 Oct 2006 23:00:47 MDT

kroyale posted a photo

First time on the floor since it got tore down for body and paint work. - 100906015.jpg

Successful docking of the cab. No mishaps! I waited to assemble the rear susspension until after the cab was on so that the frame would easily slide under the cab.

kroyale — Tue, 10 Oct 2006 23:00:46 MDT

kroyale posted a photo

Successful docking of the cab. No mishaps! I waited to assemble the rear susspension until after the cab was on so that the frame would easily slide under the cab. - 100906014.jpg

10/08/06 Putting the cab on the frame.

kroyale — Tue, 10 Oct 2006 23:00:45 MDT

kroyale posted a photo

10/08/06 Putting the cab on the frame. - 100906008.jpg

This should give you a good idea of what the finished project will be like. It\'s gonna be painted like they used to paint commercial trucks back in 1961.

kroyale — Tue, 10 Oct 2006 22:55:13 MDT

kroyale posted a photo

This should give you a good idea of what the finished project will be like. It\'s gonna be painted like they used to paint commercial trucks back in 1961. - 100906005.jpg

Great day! Looking at all my hard work shining in the sun.

kroyale — Tue, 10 Oct 2006 22:55:12 MDT

kroyale posted a photo

Great day! Looking at all my hard work shining in the sun. - 100906004.jpg

Bed close up....

kroyale — Tue, 10 Oct 2006 22:55:11 MDT

kroyale posted a photo

Bed close up.... - 100906002.jpg

This shot was taken right after the black semi gloss was sprayed on the Cab, bed, and hood.

kroyale — Tue, 10 Oct 2006 22:55:10 MDT

kroyale posted a photo

This shot was taken right after the black semi gloss was sprayed on the Cab, bed, and hood. - 100306022.jpg

The underside of the hood gets black semi gloss.

kroyale — Tue, 10 Oct 2006 22:55:09 MDT

kroyale posted a photo

The underside of the hood gets black semi gloss. - 100306021.jpg

9/30/06 The cab ready for black semi gloss on the underside, fire wall, and back panel.

kroyale — Tue, 10 Oct 2006 22:55:08 MDT

kroyale posted a photo

9/30/06 The cab ready for black semi gloss on the underside, fire wall, and back panel. - 100306020.jpg

The bed being prepped for the black semi gloss paint on the inside.

kroyale — Tue, 10 Oct 2006 22:55:07 MDT

kroyale posted a photo

The bed being prepped for the black semi gloss paint on the inside. - 100306019.jpg

Exterior of cab was painted first.

kroyale — Fri, 29 Sep 2006 17:36:20 MDT

kroyale posted a photo

Exterior of cab was painted first. - 092906002.jpg

Cowl panel, or wiper cover, whatever you prefer.

kroyale — Fri, 29 Sep 2006 17:22:44 MDT

kroyale posted a photo

Cowl panel, or wiper cover, whatever you prefer. - 092906017.jpg

Shifter knob...

kroyale — Fri, 29 Sep 2006 17:22:43 MDT

kroyale posted a photo

Shifter knob... - 092906016.jpg

door hinges....

kroyale — Fri, 29 Sep 2006 17:22:42 MDT

kroyale posted a photo

door hinges.... - 092906014.jpg

This is that rack of parts after the topcoat has been applied.

kroyale — Fri, 29 Sep 2006 17:22:41 MDT

kroyale posted a photo

This is that rack of parts after the topcoat has been applied. - 092906012.jpg

This is my mixing bench.

kroyale — Fri, 29 Sep 2006 17:22:40 MDT

kroyale posted a photo

This is my mixing bench. - 092906011.jpg

I like painting parts on a rack like this. It allows me to get around everything real good, and after it\'s dry, I can roll the whole thing out of the booth without having to handle fresh paint.

kroyale — Fri, 29 Sep 2006 17:22:39 MDT

kroyale posted a photo

I like painting parts on a rack like this. It allows me to get around everything real good, and after it\'s dry, I can roll the whole thing out of the booth without having to handle fresh paint. - 092906010.jpg

9/20/06 This is a batch of body parts ready to be painted.

kroyale — Fri, 29 Sep 2006 17:22:38 MDT

kroyale posted a photo

9/20/06 This is a batch of body parts ready to be painted. - 092906008.jpg

Here\'s the hood with it\'s fresh coat of Spice Tea. I think this was around Sep 18, 2006.

kroyale — Fri, 29 Sep 2006 17:22:37 MDT

kroyale posted a photo

Here\'s the hood with it\'s fresh coat of Spice Tea. I think this was around Sep 18, 2006. - 092906006.jpg

The bed,cab, and hood were the first to get color. Exciting time for me, it means that another phase of the project is almost done.

kroyale — Fri, 29 Sep 2006 17:22:34 MDT

kroyale posted a photo

The bed,cab, and hood were the first to get color. Exciting time for me, it means that another phase of the project is almost done. - 092906001.jpg

I trimmed and folded the edges of the wheel wells for tire clearance. I plan to make some cool fenders from the original tubs.

kroyale — Fri, 15 Sep 2006 21:08:05 MDT

kroyale posted a photo

I trimmed and folded the edges of the wheel wells for tire clearance. I plan to make some cool fenders from the original tubs. - 091506009.jpg

I mounted the gas tank to the front panel. It\'s a 13.5 gallon poly tank from speedway. I forgot to take the picture while I had it mounted.

kroyale — Fri, 15 Sep 2006 21:08:03 MDT

kroyale posted a photo

I mounted the gas tank to the front panel. It\'s a 13.5 gallon poly tank from speedway. I forgot to take the picture while I had it mounted. - 091506010.jpg

9/15/06 The hood had it\'s share of dents, so I flipped it over and pounded \'em out from the bottom side.

kroyale — Fri, 15 Sep 2006 21:08:02 MDT

kroyale posted a photo

9/15/06 The hood had it\'s share of dents, so I flipped it over and pounded \'em out from the bottom side. - 091506011.jpg

This is a lot of the parts for the under dash and interior of the truck. They will be cleaned and detailed as the truck is put back together.

kroyale — Fri, 15 Sep 2006 21:08:00 MDT

kroyale posted a photo

This is a lot of the parts for the under dash and interior of the truck. They will be cleaned and detailed as the truck is put back together. - 091506012.jpg

These parts are waiting for their time to come.

kroyale — Fri, 15 Sep 2006 21:07:58 MDT

kroyale posted a photo

These parts are waiting for their time to come. - 091506013.jpg

9/14/06 I try to work several panels at one time. At this point I am working the inside of the doors and the hood.

kroyale — Fri, 15 Sep 2006 21:07:56 MDT

kroyale posted a photo

9/14/06 I try to work several panels at one time. At this point I am working the inside of the doors and the hood. - 091506014.jpg

door hinges are taken apart, sand blasted and put together with new bushings

kroyale — Fri, 15 Sep 2006 21:07:54 MDT

kroyale posted a photo

door hinges are taken apart, sand blasted and put together with new bushings - 091506015.jpg

right bed side after body work and primer

kroyale — Thu, 31 Aug 2006 20:33:15 MDT

kroyale posted a photo

right bed side after body work and primer - 083106020.jpg

083106016.jpg

kroyale — Thu, 31 Aug 2006 20:33:13 MDT

kroyale posted a photo

083106016.jpg

right bed side

kroyale — Thu, 31 Aug 2006 20:33:11 MDT

kroyale posted a photo

right bed side - 083106004.jpg

August 31, 2006. Final prime on the cab, fenders,and front header panel/valance/whatever you call it sheet metal piece between the fenders and behind the grill....

kroyale — Thu, 31 Aug 2006 20:33:09 MDT

kroyale posted a photo

August 31, 2006. Final prime on the cab, fenders,and front header panel/valance/whatever you call it sheet metal piece between the fenders and behind the grill.... - 083106001.jpg

The brown stuff on my body work is spray can lacquer primer that I use for a guide coat. It all gets sanded off.

kroyale — Tue, 22 Aug 2006 17:30:48 MDT

kroyale posted a photo

The brown stuff on my body work is spray can lacquer primer that I use for a guide coat. It all gets sanded off. - 082106003.jpg

This angle shows some of the body work almost ready for primer.

kroyale — Tue, 22 Aug 2006 17:30:21 MDT

kroyale posted a photo

This angle shows some of the body work almost ready for primer. - 082106004.jpg

Pieces cut from donor door skins where cut to make patches for shaving the door handles. The red piece is for the other door. This door needs a little more welding before it\'s done.

kroyale — Tue, 22 Aug 2006 17:29:41 MDT

kroyale posted a photo

Pieces cut from donor door skins where cut to make patches for shaving the door handles. The red piece is for the other door. This door needs a little more welding before it\'s done. - 082106006.jpg

this side of the cab had damage at the bottom rear corner and some minor stuff on the upper corner too. The fender on this side was smashed in big time. Some hammer and dolly work along with some rage body filler and it\'s looking good.

kroyale — Tue, 22 Aug 2006 17:29:20 MDT

kroyale posted a photo

this side of the cab had damage at the bottom rear corner and some minor stuff on the upper corner too. The fender on this side was smashed in big time. Some hammer and dolly work along with some rage body filler and it\'s looking good. - 082106007.jpg

things sure get messy when you start working with plastic filler.

kroyale — Tue, 22 Aug 2006 17:26:39 MDT

kroyale posted a photo

things sure get messy when you start working with plastic filler. - 082106002.jpg

This side is was in better shape. The fender was dented at the front and it had minimal rust at the bottom where it meets the rocker. It also has the stock gas filler shaved.

kroyale — Tue, 22 Aug 2006 16:51:06 MDT

kroyale posted a photo

This side is was in better shape. The fender was dented at the front and it had minimal rust at the bottom where it meets the rocker. It also has the stock gas filler shaved. - 082106005.jpg

The hood and the cab were the last bare metal parts to get primer.

kroyale — Thu, 17 Aug 2006 14:23:39 MDT

kroyale posted a photo

The hood and the cab were the last bare metal parts to get primer. - 081706003.jpg

this shot is when the front frame section was being put back on.

kroyale — Thu, 17 Aug 2006 14:07:27 MDT

kroyale posted a photo

this shot is when the front frame section was being put back on. - 021706017.jpg

all new brake parts, shocks, steering box,pitman arm, and ball joint dust boots. All the other front end parts checked out fine.

kroyale — Thu, 17 Aug 2006 14:04:37 MDT

kroyale posted a photo

all new brake parts, shocks, steering box,pitman arm, and ball joint dust boots. All the other front end parts checked out fine. - 072406005.jpg

nasty and greasy... kinda like most car guys

kroyale — Thu, 17 Aug 2006 14:03:43 MDT

kroyale posted a photo

nasty and greasy... kinda like most car guys - 072406006.jpg

this engine came from a friend that did a V8 swap, it ran strong in his truck, so it\'s only getting some new gaskets, water pump, fuel pump, harmonic balancer, and a detail job.

kroyale — Thu, 17 Aug 2006 14:02:36 MDT

kroyale posted a photo

this engine came from a friend that did a V8 swap, it ran strong in his truck, so it\'s only getting some new gaskets, water pump, fuel pump, harmonic balancer, and a detail job. - 072406012.jpg

freshly painted engine

kroyale — Thu, 17 Aug 2006 14:01:45 MDT

kroyale posted a photo

freshly painted engine - 072506002.jpg

clean metal, inside and out

kroyale — Thu, 17 Aug 2006 14:00:56 MDT

kroyale posted a photo

clean metal, inside and out - 081006016.jpg

this fork lift doesn\'t have any brakes what so ever

kroyale — Thu, 17 Aug 2006 14:00:15 MDT

kroyale posted a photo

this fork lift doesn\'t have any brakes what so ever - 081006021.jpg

rack of parts after being primed

kroyale — Thu, 17 Aug 2006 13:59:46 MDT

kroyale posted a photo

rack of parts after being primed - 081006022.jpg

bare metal cab

kroyale — Thu, 17 Aug 2006 13:59:09 MDT

kroyale posted a photo

bare metal cab - 081006023.jpg

the bed after etching primer

kroyale — Thu, 17 Aug 2006 13:57:49 MDT

kroyale posted a photo

the bed after etching primer - 081606008.jpg

Etch pimer applied. After a 20 min flash it gets a full wet coat of gray urethane fill primer. After some cure time it will be ready to block sand.

kroyale — Thu, 17 Aug 2006 13:57:10 MDT

kroyale posted a photo

Etch pimer applied. After a 20 min flash it gets a full wet coat of gray urethane fill primer. After some cure time it will be ready to block sand. - 081706001.jpg

I always date and number my primer coats to keep myself from getting out of order. When you have multiple panels with different degrees of body work needed, I find that doing this helps out a lot.

kroyale — Thu, 17 Aug 2006 13:53:56 MDT

kroyale posted a photo

I always date and number my primer coats to keep myself from getting out of order. When you have multiple panels with different degrees of body work needed, I find that doing this helps out a lot. - 081606007.jpg

This is the same color test panel without the flash on my camera. Don\'t call it brown..... it\'s spice tea. Pictures don\'t show the true effect.

kroyale — Thu, 17 Aug 2006 13:43:41 MDT

kroyale posted a photo

This is the same color test panel without the flash on my camera. Don\'t call it brown..... it\'s spice tea. Pictures don\'t show the true effect. - 081606004.jpg

cab recieving it\'s coat of etch primer

kroyale — Thu, 17 Aug 2006 13:43:39 MDT

kroyale posted a photo

cab recieving it\'s coat of etch primer - 081706004.jpg

this paint rack rolls right in to the paint booth. There is a batch of semi-gloss black parts and some gloss white trim pieces on it in this shot.

kroyale — Thu, 17 Aug 2006 13:27:43 MDT

kroyale posted a photo

this paint rack rolls right in to the paint booth. There is a batch of semi-gloss black parts and some gloss white trim pieces on it in this shot. - 081606006.jpg

This is the exterior color, I call it Spice Tea. It\'s a heavy metallic with a satin clear coat just like I used on the Grinch. Interior sheet metal will be frost white full gloss.

kroyale — Thu, 17 Aug 2006 13:27:41 MDT

kroyale posted a photo

This is the exterior color, I call it Spice Tea. It\'s a heavy metallic with a satin clear coat just like I used on the Grinch. Interior sheet metal will be frost white full gloss. - 081606003.jpg

bare metal cab just before going into the booth for etching primer and urethane fill primer.

kroyale — Thu, 17 Aug 2006 13:27:40 MDT

kroyale posted a photo

bare metal cab just before going into the booth for etching primer and urethane fill primer. - 081606001.jpg

highly trained forklift operator

kroyale — Thu, 10 Aug 2006 20:28:50 MDT

kroyale posted a photo

highly trained forklift operator - 081006020.jpg

bare metal parts just back from being dipped.

kroyale — Thu, 10 Aug 2006 20:28:49 MDT

kroyale posted a photo

bare metal parts just back from being dipped. - 081006019.jpg

bare metal parts

kroyale — Thu, 10 Aug 2006 20:28:45 MDT

kroyale posted a photo

bare metal parts - 081006014.jpg

all in bare metal just back from being dipped

kroyale — Thu, 10 Aug 2006 20:28:44 MDT

kroyale posted a photo

all in bare metal just back from being dipped - 081006007.jpg

mocked up with all major chassis modifications finished

kroyale — Tue, 25 Jul 2006 20:19:08 MDT

kroyale posted a photo

mocked up with all major chassis modifications finished - Robt0306013.jpg

engine and chassis coming together

kroyale — Tue, 25 Jul 2006 20:19:07 MDT

kroyale posted a photo

engine and chassis coming together - 072506003.jpg

begining the chassis assembly

kroyale — Tue, 25 Jul 2006 09:46:15 MDT

kroyale posted a photo

begining the chassis assembly - 072406014.jpg

cleaning and detailing the engine and tranny

kroyale — Tue, 25 Jul 2006 09:44:15 MDT

kroyale posted a photo

cleaning and detailing the engine and tranny - 072406007.jpg

it\'s a 250 chevy six from a \'66 chev truck

kroyale — Tue, 25 Jul 2006 09:44:14 MDT

kroyale posted a photo

it\'s a 250 chevy six from a \'66 chev truck - 072406013.jpg

a messy parts table

kroyale — Tue, 25 Jul 2006 09:44:12 MDT

kroyale posted a photo

a messy parts table - 072406011.jpg

front end assembly

kroyale — Tue, 25 Jul 2006 09:44:09 MDT

kroyale posted a photo

front end assembly - 072406003.jpg

loaded up to go get all the sheet metal dipped at Metal Finishing Services in Jackson, MS

kroyale — Fri, 14 Jul 2006 20:51:43 MDT

kroyale posted a photo

loaded up to go get all the sheet metal dipped at Metal Finishing Services in Jackson, MS - 071406008.jpg

Freshly powder coated frame, some of the front end parts were painted because of bushings that can\'t handle the heat of baking powder coat

kroyale — Fri, 14 Jul 2006 20:51:41 MDT

kroyale posted a photo

Freshly powder coated frame, some of the front end parts were painted because of bushings that can\'t handle the heat of baking powder coat - 071406007.jpg

stripped down cab ready to go get dipped

kroyale — Fri, 14 Jul 2006 20:51:40 MDT

kroyale posted a photo

stripped down cab ready to go get dipped - 071406006.jpg